ASTM B407 Incoloy 800 Seamless Pipe, Incoloy Alloy 800 Exhaust Pipe Dealers
ASTM B163 Incoloy 800 Seamless Pipes Manufacturer, Incoloy UNS N08800 Square Pipes Suppliers
Incoloy UNS N08800 Seamless Pipe, Incoloy DIN NR. 1.4876 Pipes Suppliers

Incoloy 800 Pipe

Incoloy 800 Welded Pipe

Incoloy 800 Seamless Pipe
Incoloy 800, 800H, and 800HT pipe is made of nickel-iron-chromium which holds good strength and excellent resistance to oxidation and carburization in high-temperature exposure. These nickel steel pipes are identical except for the higher level of carbon in alloy 800H, and the addition of up to 1.20 % aluminum and titanium in 800HT. ASTM B407 Alloy 800 Pipe was the first of these alloys and it was slightly modified into Incoloy 800H. This modification was to control carbon content (0.05% -0.10%) and grain size to optimize stress rupture properties. Incoloy 800HT has further modifications to the combined titanium and aluminum levels (0.85%-1.20%) to guarantee optimum high temperature properties.
Incoloy 800H/ HT SCH40 pipe was specially made for high temperature structural applications. The presence of nickel content makes this pipe highly resistant to both chloride stress-corrosion cracking and embrittlement resulted from precipitation of sigma phase. The general corrosion resistance of Incoloy Alloy 800 Exhaust Pipe is excellent. In the solution annealed state, alloys 800H and 800HT have better-quality creep and stress rupture properties.
Incoloy 800 is primarily used in applications that can withstand 1100° F temperature. Alloys 800H and 800HT are normally used where in resistance to creep and rupture is required. The chemical balance present in the nickel steel alloy shows excellent resistance to carburization, oxidation and nitriding atmospheres. Excellent cold forming characteristics typically associated with the nickel-chromium alloys are exhibited with 800HT piping and also can be welded by the common techniques.
Table of contents
- ASME SB407 Incoloy 800 Pipe Price
- Incoloy 800 Pipe Specification
- Incoloy UNS N08800 / N08810 / N08811 Seamless Pipe
- GOST ЭИ670 Welded Pipe
- Incoloy 800 Pipe Mechanical Properties
- Incoloy 800 Pipe Yield Strength
- Alloy 800H ERW Pipe Size
- Incoloy DIN 1.4876/1.4958/1.4859 Pipe Stock
- 800 Incoloy EFW Pipe Pressure Rating
ASME SB407 Incoloy 800 Pipe Price
Incoloy 800/H/HT Pipe Price | Origin | Price in INR (per kg) |
Price in USD (per kg) |
Price in Euro (per kg) |
Others |
---|---|---|---|---|---|
Price in USA | USA | Rs 1600/- | $24 | €20 | Fix Length |
Price in Japan | Japanese | Rs 1400/- | $21 | €18 | Fix Length |
Price in UK / Europe | European | Rs 1500/- | $22 | €19 | Fix Length |
Price in India | Indian | Rs 1200/- | $17 | €14 | Cut to Size |
Incoloy 800 Pipe Specification
Alloy 800 Pipe Specification | ASTM B 167 ASME SB 167 / ASTM B 829 ASME SB 829 / ASTM B 517 ASME SB 517 |
---|---|
Incoloy Alloy 800 Pipe Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
Our Presence | USA, Canada, Australia, UK, Malaysia, Poland, Iran, Italy, Singapore, UAE |
Incoloy 800 Welded Pipe size | 5.0 mm – 1219.2 mm |
Alloy 800 EFW Pipe size | 5.0 mm – 1219.2 mm |
Specialized in | Large Diameter Alloy 800 Pipe |
Incoloy 800 Pipe Form | Hollow, Square, Round, Rectangular , Straight Pipes, Hydraulic Etc. |
Alloy 800 Pipe End | Plain End, Beveled End, Treaded. |
Incoloy 800 Pipe Length | Single Random, Double Random & Cut Length. |
Alloy 800 Seamless Pipe size | 4 to 219mm W. T.: 0.5 to 20mm |
Marking | All Incoloy Alloy 800 Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
Manufacturers of Incoloy 800 Pipe |
|
Incoloy 800 Pipe Schedule | SCH5, SCH10, SCH40, STD, SCH80, SCH160 |
Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 |
Test |
|
Origin | European, Japanese, Korean, US, Russian, Indian (Strictly No Chinese Material) |
We can also cut, thread, and groove Incoloy 800 Pipes to meet your specifications. |
Incoloy 800/800H/800HT Pipe ASTM Specifications
Alloy | Pipe Seamless | Pipe Welded |
---|---|---|
Alloy 800 (UNS N08800) | B407 | B154 |
Alloy 800H (UNS N08810) | B407 | B154 |
Alloy 800HT (UNS N08811) | B407 | B154 |
Incoloy 800 / 800H / 800HT Pipe, Seamless and Welded Stock List
Product form | Dimension |
---|---|
Pipe; cold drawn, pickled, annealed | 13.72 x 2.24 mm (¼"nb sch40s) |
Pipe; seamless, cold finished, solution annealed | 26.67 x 3.91 mm (¾"nb sch80s) |
Pipe; cold drawn, pickled, solution annealed | 33.40 x 3.38 mm (1"nb sch40s) |
Pipe; seamless, cold finished, annealed | 33.40 x 4.55 mm (1"nb sch80s) |
Pipe; seamless, cold finished, annealed | 48.26 x 3.68 mm (1½"nb Sch40s) |
Pipe; cold drawn, pickled, annealed | 50.8 x 2.64 mm |
Pipe; cold drawn, pickled, solution annealed | 60.33 x 3.91 mm (2"nb sch40s) |
Pipe; cold drawn, pickled, solution annealed | 60.33 x 2.77 mm (2"nb Sch10s) |
Pipe; cold drawn, pickled, solution annealed | 60.33 x 3.91 mm (2"nb sch40s) |
Pipe; cold drawn, pickled, solution annealed | 88.90 x 5.49 mm (3"nb sch40s) |
Pipe; seamless, hot finished, pickled, passivated | 114.3 x 6.02 mm (4"nb sch40s) |
Incoloy Pipe Types | Out diameter | Wall thickness | Length |
---|---|---|---|
Incoloy 800 Welded Pipe (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
Incoloy 800 Seamless Pipe (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
Incoloy 800 Pipe suppliers

ASTM B514 Incoloy 800 Rectangle Pipe

GOST ЭИ670 800 Welded Pipe

WERKSTOFF NR. 1.4876 Clad Pipe

Incoloy 800 Pipe material

Incoloy UNS N08800 / N08810 / N08811 Weld Pipe

Incoloy ® 800 Square Pipe

Alloy 800H ERW Hollow Pipe

Incoloy 800 Lined Pipe

Incoloy 800 Flex Pipe

Incoloy 800 Exhaust Pipe

Incoloy 800 Square Pipe (Radius Corners)

ASME SB407 Incoloy 800 Seamless Pipe
Types of Incoloy 800 Seamless & Welded Pipe
|
|
Incoloy 800 Pipe composition & technical information
Incoloy 800 Pipe Yield Strength
800/ 800H/ 800HT Incoloy Alloy Pipes Chemical Composition
Grade | C | Mn | Si | Fe | S | Cr | Al-Ti | Ni | |
Incoloy 800 Pipe | min. | – | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
Incoloy 800H Pipe | min. | 0.05 | – | – | 39.5 | – | 19.0 | 0.15 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 0.60 | 35.0 | |
Incoloy 800HT Pipe | min. | 0.06 | – | – | 39.5 | – | 19.0 | 0.85/0.25 | 30.0 |
max. | 0.1 | 1.5 | 1.0 | – | 0.015 | 23.0 | 1.20/0.60 | 35.0 |
Incoloy Alloy 800/ 800H/ 800HT Pipe Mechanical Properties
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
800-H-HT | Psi – 75,000 , MPa – 520 | Psi – 30,000 , MPa –205 | 30 | – | – |
Equivalent Grades for 800 / 800H / 800HT Incoloy Pipe
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
Incoloy 800 Pipe | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
Incoloy 800H Pipe | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
Incoloy 800HT Pipe | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | – | X8NiCrAlTi32-21 | XH32T |
Alloy 800H ERW Pipe Size
Wall | Sizes ( O.D.) |
---|---|
.010 | 1/16" , 1/8" , 3/16" |
.020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
.012 | 1/8" |
.016 | 1/8" , 3/16" |
.028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
.035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
.083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
.095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
.109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
.120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
.125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
.134 | 1" |
.250 | 3" |
.375 | 3 1/2" |
Incoloy DIN 1.4876/1.4958/1.4859 Pipe Stock
Sale of the Month
Incoloy 800 Pipe Size | PACK QTY | PRICE |
---|---|---|
1/4"(13.72) NBx Sch10/10s(1.65) wall x500 | 1 | £80.00 |
1/4"(13.72) NBx Sch10/10s(1.65) wall x500 | 2 | £124.00 |
1/4"(13.72) NBx Sch10/10s(1.65) wall x500 | 3 | £164.00 |
1/4"(13.72) NBx Sch10/10s(1.65) wall x500 | 4 | £200.00 |
1/4"(13.72) NBx Sch10/10s(1.65) wall x500 | 5 | £230.00 |
1/4"(13.72) NBx Sch10/10s(1.65) wall x1000 | 1 | £101.00 |
1/4"(13.72) NBx Sch10/10s(1.65) wall x1000 | 3 | £255.00 |
1/4"(13.72) NBx Sch10/10s(1.65) wall x1000 | 5 | £380.00 |
1/4"(13.72) NBx Sch10/10s(1.65) wall x2000 | 1 | £155.00 |
1/4"(13.72) NBx Sch10/10s(1.65) wall x2000 | 3 | £385.00 |
Here is a list of our readily available stock of Incoloy 800 Pipe
BEST PRICE OF | ||
---|---|---|
|
|
|
800 Incoloy EFW Pipe Pressure Rating
Alloy 400 Pipe Pressure Rating
Tube O.D. (in.) |
Wall Thickness of Tube (inches) | |||||||
---|---|---|---|---|---|---|---|---|
.028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
Working Pressure (psig) | ||||||||
1/8 | 7900 | 10100 | ||||||
1/4 | 3700 | 4800 | 7000 | 9500 | ||||
5/16 | 3700 | 5400 | 7300 | |||||
3/8 | 3100 | 4400 | 6100 | |||||
1/2 | 2300 | 3200 | 4400 | |||||
3/4 | 2200 | 3000 | 4000 | 4600 | ||||
1 | 2200 | 2900 | 3400 | 3900 | 4300 |