UNS N07750 Inconel X750 Tubes Suppliers, X750 Inconel Tube Stockist
Alloy X750 Exhaust Tubes, ASTM B751 Inconel Alloy X750 Seamless Tubing
Inconel WERKSTOFF NR. 2.4669 Stockists, Inconel X750 Tube Price In Mumbai, India
Inconel x750 Tube
Inconel x750 Seamless Tube
Inconel x750 Tubing
Inconel X750 Tube is austenitic under all conditions. The alloy is heat treated by several different methods depending upon the application or requirement. Two common Heat treatments for UNS N07750 Inconel X750 seamless Tube are-
- For maximum creep, relaxation and rupture strength at temp. above 1100°F i.e. 593°C-
- Solution Treatment : 2100°F (1149°C), 2 to 4 hours, air cool.
- Intermediate Age : 1550°F (843°C), 24 hours, air cool.
- Final Age :1300°F (704°C), 20 hours, air cool.
- For highest room temp. yield strength and tensile ductility-
- Stress Equalization : 1625°F (885°C), 24 hours, air cool.
- Precipitation Age : 1300°F (704°C), 20 hours, air cool.
The furnace temperature should be 2100°F (1149°C)-for optimal starting temperatures of 1950/2000°F. For service below 1100°F (593°C), higher strength can be obtained by combining some cold work with heat treatment because the effects are additive.
Alloy X-750 tube work hardens quickly and is more difficult to machine than most standard ferritic and martensitic alloys. The alloy is most easily machined in the stress-equalized condition. Because specific cutting forces are high, the machine tools used must have ample power and the cutting speed should be slow. The tools must have smooth finishes, be sharp, and be very rigid. To avoid work hardening , a continuous, smooth cutting action should be maintained; thus, the machines must have a minimum of backlash and the tool and workpiece must be rigidly supported. If at all possible, avoid very small cuts and feeds.
ASTM B751 Inconel Alloy X750 Seamless Tubing, is welded in the stress-equalized condition, 1625°F (885°C) heat treatment, and solution treated and age hardened after welding has been completed. If this is not practical, the alloy should be welded in the solution-treated condition and age hardened after welding with or without the inclusion of a short-period stress-relieving treatment at 1625°F.
Table of contents
Inconel x750 Tube Price
| Inconel X750 Tube Price | Origin | Price in INR (per kg) |
Price in USD (per kg) |
Price in Euro (per kg) |
Others |
|---|---|---|---|---|---|
| Inconel X750 Tube Price in UK / Europe | European | Rs 6900/- | $101 | €87 | Fix Length |
| Inconel X750 Tube Price in Japan | Japanese | Rs 6200/- | $91 | €78 | Fix Length |
| Inconel X750 Tube Price in India | Indian | Rs 5500/- | $80 | €68 | Cut to Size |
| Inconel X750 Tube Price in USA | USA | Rs 7500/- | $110 | €94 | Fix Length |
Click here for complete (grade & size wise)
Inconel x750 Tubes Specification
| Application | Oil Tube, Gas Tube, Fluid Tube, Boiler and Heatexchanger |
|---|---|
| Inconel X750 Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
| Inconel X750 Welded Tube Size | 6.35 mm OD To 152 mm OD |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
| Alloy X750 tube Length | Single Random, Double Random, Standard & Cut length |
| Inconel X750 Tube Standards | ASTM B751, ASME SB751, AMS 5582, AMS 5583 |
| Inconel X750 tube Form | Round, Coil, Square, Rectangular, Boiler, Hydraulic, Straight or ‘U’ bent Tubes, Hollow, LSAW Tubes Etc. |
| Inconel X750 Tube Type | Seamless, ERW, EFW, Welded, Fabricated |
| End | Plain End, Beveled End, Treaded |
| Marking | All Inconel Alloy X750 tubes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Inconel X750 tubing wall thickness | 0.020" –0.220", (special wall thicknesses available) |
| Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Specialize in | Inconel X750 Capillary Tube & Other Odd Size Inconel X750 Heat Exchanger & Condenser Tubes |
| Inconel Alloy X750 Tube Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| Manufacturers of Inconel X750 Tubes & Tubing |
|
| We can also cut, thread, and groove Inconel X750 Tubes to meet your specifications | |
Inconel X750 Tubing Standard:
| ASTM | USA | Ameirican Society of Mechanical Engineers |
| AISI | USA | Acronym of American Iron and Steel Institute |
| JIS | JP | Japanese Industrial Standards |
| DIN | GER | Deutsches Institut für Normung e.V. |
| UNS | USA | Unified Numbering System |
| Types | Out diameter | Sizes | Length |
|---|---|---|---|
| Inconel X750 Welded Tube (ERW Tube) (in Stock + Custom Sizes) | 6.35 mm OD To 152 mm OD | As per requirement | Cut to length |
| Inconel X750 Seamless Tube (Custom Sizes) | 6.35 mm OD To 101.6 mm OD | As per requirement | Cut to length |
| NB Sizes (in stock) | .0035” ~ 8” | 1/8", 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1.25", 1.5", 2", 2.5", 3", 4", 5", 6" | Cut to length |
Inconel X750 Seamles Tubes Surface Finish
| Surface Finish | Internal Surface(ID) | Exterbal Surface(OD) | |||
| Roughness Average(RA) | Roughness Average(RA) | ||||
| μ inch | μm | μ inch | μm | ||
| AP | Annealed & Pickled | Not defined | Not defined | 40 or Not defined | 1.0 or Not defined |
| EP | Electro Polish | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
| MP | Mechanical Polish | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
| BA | Beight Annealed | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
Inconel x750 Tubes Stock
Inconel x750 Coiled Tubing
Inconel x750 Square Tube
Inconel x750 Gas Tube Ar 15 supplier
Inconel x750 Inconel tubing
Inconel x750 Seamless tubing
Inconel x750 Thin Wall tube
Inconel x750 Furnace Tube
Inconel x750 Inconel Gas Tube
Inconel x750 Heat Exchanger Tubes
Inconel x750 Boiler Tube
Inconel x750 Capillary Tube
Inconel x750 Rectangle Tube
Inconel x750 Alloy Square Tube (Radius Corners)
Inconel x750 Welded Tubing
Inconel x750 ‘U’ Shaped tubing
Types of Inconel X750 Seamless & Welded Tubes
| Alloy X750 Seamless Tubes | X750 Alloy Round Tube |
| Inconel X750 Condenser Tubes | Inconel X750 Aero engine tubes |
| Alloy X750 Welded Tubes | Alloy X750 Seamless Tubing |
| Inconel X750 Elliptical and Oval Tubes | Inconel X750 Rectangular Tube |
| Inconel X750 Aerospace tubes | Inconel X750 High Pressure Tube |
| Inconel X750 Sighting Tube | Inconel X750 Polish Tubes |
| Alloy X750 straight tube boiler | Inconel X750 furnace tube |
| Alloy X750 Coiled Tubing | Inconel Alloy X750 Capillary Tubing |
Inconel X750 tubing composition & technical information
Inconel Alloy x750 Tube Chemical Composition
| % | NI | CR | C | MN | CU | SI | S | FE |
|---|---|---|---|---|---|---|---|---|
| Min | 70 | 14 | - | - | - | - | - | 5 |
| Max | - | 17 | 0.08 | 1 | 0.50 | 0.50 | 0.01 | 9 |
Inconel x750 Tubing Mechanical Properties
| MECHANICAL & PHYSICAL PROPERTIES | 20°C | 200°C | 400°C | 427°C | 538°C | 600°C | 649°C | 732°C | 816°C |
|---|---|---|---|---|---|---|---|---|---|
| Elongation % | 36 | 49 | 47 | 47 | - | 46 | 47 | - | 48 |
| Thermal Conductivity /kcal/(hr.m.°C) | - | - | 10 | 11.2 | 12.1 | 12.9 | 15 | 15.66 | 15.84 |
| Coefficient of Thermal Expansion µm/m⁰C | - | - | - | 14.22 | 14.94 | 15.12 | 15.48 | 15.66 | 15.84 |
| Ultimate Tensile Strength /MPa | 1503.1 | 1351.4 | 744.6 | 688.8 | - | 622.6 | 593 | - | 600 |
| 0.2% Yield Strength /MPa | 979.1 | 737.7 | 365.4 | 340.6 | - | 278.5 | 250.3 | - | 253.7 |
| Modulus of Elasticity / x105 MPa | - | - | 1.95 | 1.89 | - | 1.8 | 1.71 | - | 1.61 |
| Charpy Impact V-notch /J | 436.6 | 115.2 | 189.8 | - | - | - | - | - | - |
Alloy x750 Tube Physical Properties
Density: 8.276 g/cm³Melting range: 1393-1427°C
Poisson's ratio: 0.3
Electrical resistivity: 1.22 x 10-6 Ω⋅m
Corrosion resistance: PREN (PREN = %Cr + 3.3x%Mo + 16x%N) 44
Equivalent Grades for Inconel x750 Seamless and Welded Tubes
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel X-750 | 2.4669 | N07750 |
Inconel x750 Tube Sizes
| Wall | Sizes ( O.D.) |
|---|---|
| .010 | 1/16" , 1/8" , 3/16" |
| .020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
| .012 | 1/8" |
| .016 | 1/8" , 3/16" |
| .028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
| .035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
| .083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
| .095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
| .109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
| .120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
| .125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
| .134 | 1" |
| .250 | 3" |
| .375 | 3 1/2" |
Inconel 718 Tube Stock
Sale of the Month
| PRODUCT NAME | PACK QTY | PRICE |
|---|---|---|
| 6.0mm dia x 1.0mm wall x500mm | 1 | £96.00 |
| x750 6.0mm dia x 1.0mm wall x500mm | 2 | £154.00 |
| x750 6.0mm dia x 1.0mm wall x500mm | 3 | £208.00 |
| x750 6.0mm dia x 1.0mm wall x500mm | 4 | £255.00 |
| x750 6.0mm dia x 1.0mm wall x500mm | 5 | £294.00 |
| x750 6.0mm dia x 1.0mm wall x1000mm | 1 | £125.00 |
| x750 6.0mm dia x 1.0mm wall x1000mm | 3 | £327.00 |
| x750 6.0mm dia x 1.0mm wall x1000mm | 5 | £492.00 |
| x750 6.0mm dia x 1.0mm wall x2000mm | 1 | £197.00 |
| x750 6.0mm dia x 1.0mm wall x2000mm | 3 | £500.00 |
Here is a list of our readily available stock of Inconel X750 Tube
Inconel Alloy X750 Tubing
| BEST PRICE OF | |
|---|---|
|
|
Inconel x750 Tube Pressure Rating
| Tube O.D. (in.) |
Wall Thickness of Tube (inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| .028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
| Working Pressure (psig) | ||||||||
| 1/8 | 7900 | 10100 | ||||||
| 1/4 | 3700 | 4800 | 7000 | 9500 | ||||
| 5/16 | 3700 | 5400 | 7300 | |||||
| 3/8 | 3100 | 4400 | 6100 | |||||
| 1/2 | 2300 | 3200 | 4400 | |||||
| 3/4 | 2200 | 3000 | 4000 | 4600 | ||||
| 1 | 2200 | 2900 | 3400 | 3900 | 4300 | |||