Inconel suppliers, Inconel Products Stockist
Inconel Material Specification
- Inconel 600
- Inconel 601
- Inconel 625
- Inconel 718
- Inconel X750
- Inconel 907
- Inconel 909
- Inconel 706
- Inconel 617
- Inconel 751
- Inconel 792
- Inconel 939
- Inconel 188
- Inconel 690
- Inconel 713C
- Inconel 230
Solid solution strengthened.
Acid resistant, good weldability. The LCF version is typically used in bellows. Ideal for hardware and components in the power, aerospace and chemical processing industries. Offered in sheet, plate, bar and forgings.
Gamma double prime strengthened with good weldability. The preferred material for cryogenic storage tanks, turbines, downhole shafts and wellhead parts offered in sheet, plate and bar.
Commonly used for gas turbine components, including blades, seals and rotors.
Increased aluminium content for improved rupture strength in the 1600 °F range.
Increased aluminium content for improved high temperature corrosion properties, used especially in gas turbines.
Gamma prime strengthened to increase weldability.
Readily fabricated for commercial gas turbine and aerospace applications. Offered in sheet, plate and bar.
Low cobalt content for nuclear applications, and low resistivity.
Precipitation hardenable nickel-chromium base cast alloy.
Inconel 230 Plate & Sheet mainly used by the power, aerospace, chemical processing and industrial heating industries, Aerospace Materials.
Inconel density & Inconel Properties
Inconel Tensile Strength
| Physical Properties | Metric | English | |
|---|---|---|---|
| Inconel Alloy 600 | Density | 8.47 g/cc | 0.306 lb/in³ |
| Inconel Alloy 625 | Density | 8.44 g/cc | 0.305 lb/in³ |
| Inconel Alloy 718 | Density | 8.19 | 0.296 lb/in3 (8.192 g/cm3) |
Inconel Alloy 625 Density*. 8440 [kg · m-3]
Inconel Alloy 625 Density: 0.303 lb/in3 (8.44 g/cm3)
Inconel Electrical Conductivity
| Material | Conductivity | Resistivity | Notes | |
|---|---|---|---|---|
| (% IACS) | (Siemens/m) | (Ohm-m) | ||
| Inconel 600 | 1.70 | 9.860E+05 | 1.014E-06 | conductivity converted from resistivity |
| Inconel 600 | 1.67 | 1.030E-06 | conductivity converted from resistivity | |
| Inconel 601 | 1.45< | 1.190E-06 | conductivity converted from resistivity | |
| Inconel 617 | 1.41 | 1.220E-06 | conductivity converted from resistivity | |
| Inconel 625 | 1.34 | 1.290E-06 | conductivity converted from resistivity | |
| Inconel 690 | 11.65 | 1.480E-07 | conductivity converted from resistivity | |
| Inconel 718 | 1.38 | 1.250E-06 | conductivity converted from resistivity | |
| Inconel X750 | 1.41 | 1.220E-06 | conductivity converted from resistivity | |
Inconel Hardness
Inconel Rockwell Hardness, Inconel Strength
| Material | Conductivity |
| Inconel Alloy 625 Bar | ≤ 287 HB |
| Inconel Alloy 625 Sheet | 145-240 |
| Inconel Alloy 625 Tube | |
| Seamless and Welded | - |
| Inconel Alloy 600 rod and bar | 65-85B |
| Inconel Alloy 600 Plate | 65-85B |
| Inconel Alloy 600 Sheet | 88B max |
| Inconel Alloy 600 Tube and Pipe | 88B max |
| Inconel Alloy 600 Wire | - |
| Inconel Alloy 600 Wire | - |
| Inconel Alloy 600 Wire | - |
Inconel Heat Treatment
| Heat Treatment Inconel Alloy 600 | Inconel Alloy 600 is not an age hardening alloy; cold working is the only available means of hardening. Softening by annealing begins at about 1600°F (871°C), and is reasonably complete after 10 to 15 minutes of heating at 1800°F (982°C). Above this temperature, grain growth may be objectionable, although very brief heating at 1900°F will cause complete softening without undue grain growth. Since the rate of cooling has no effect on the softening, the material may be water quenched or air cooled. |
|---|---|
| Heat Treatment Inconel Alloy 625 | Inconel Alloy 625 has three basic heat treatments: (1) High Solution Anneal - 2000/2200°F (1093/1204°C), air quench or faster. (2) Low Solution Anneal - 1700/1900°F (927/1038°C), air quench or faster. (3) Stress Relieve - 1650°F (899°C), air quench. |
| Inconel Heat Shield | Inconel (2200 deg F continuous). |
Inconel Low Temperature
| Inconel Alloy 718 | temperature ranges from cryogenic up to 1400°F |
| Inconel Alloy 625 | temperatures ranging from cryogenic to 2000°F |
Inconel Melting Point
| Inconel Alloy 718 Melting Range | Solution Treated: 2500-2600°F Solution Treated and Aged: 1370-1430°C |
| Inconel Alloy 600 Melting Range | Metric: 1354 - 1413 °C English: 2470 - 2580 °F |
| Inconel Alloy 625 Melting Range | 2350 - 2460°F (1280 - 1350°C) |
Inconel Thermal Conductivity
Inconel Thermal Properties, Inconel Thermal Expansion
| Inconel Alloy 600 Thermal Conductivity | Metric: 14.9 W/m-K English: 103 BTU-in/hr-ft²-°F |
| Inconel Alloy 625 Thermal Conductivity | Metric: 9.8 W/m-K English: 68 BTU-in/hr-ft²-°F |
Inconel Temperature Limits
| Inconel Alloy 600 Heat Capacity | Metric: 0.444 J/g-°C English: 0.106 BTU/lb-°F |
| Inconel Alloy 625 Heat Capacity | Metric: 0.41 J/g-°C English: 0.098 BTU/lb-°F |
Inconel Mechanical Properties
Typical Mechanical Properties
Inconel Machinability and Inconel Yield Strength
| Material | Form and Condition | Tensile Strength | Yield | Elongationgation % | Hardness, Rockwell | ||
|---|---|---|---|---|---|---|---|
| Inconel Alloy 600 rod and bar | Cold drawn Annealed | 80-100 | 550-690 | 25-50 | 170-345 | 55-35 | 65-85B |
| Inconel Alloy 600 Plate | Hot rolled Annealed | 80-100 | 550-725 | 30-50 | 205-345 | 55-35 | 65-85B |
| Inconel Alloy 600 Sheet | Cold Rolled Annealed | 80-100 | 550-690 | 30-45 | 205-310 | 55-35 | 88B max |
| Inconel Alloy 600 Tube and Pipe | Cold Drawn Annealed | 80-100 | 550-690 | 25-50 | 170-345 | 55-35 | 88B max |
| Inconel Alloy 600 Wire | Cold Drawn Annealed | 80-120 | 550-830 | 35-75 | 240-520 | 45-20 | - |
| Inconel Alloy 600 Wire | Cold Drawn No 1 Temper | 105-135 | 725-930 | 70-105 | 480-725 | 35-15 | - |
| Inconel Alloy 600 Wire | Spring Temper | 170-220 | 1170-1520 | 150-210 | 1035-1450 | 5-2 | - |
| Inconel Alloy 625 Bar | Annealed | 120 | 827 | 60 | 414 | 30 | ≤ 287 HB |
| Inconel Alloy 625 Sheet | Annealed | 120 | 827 | 60 | 414 | 30 | 145-240 |
| Inconel Alloy 625 Tube Seamless and Welded |
Annealed | 120 | 827 | 60 | 414 | 35 | - |
Inconel Uses and Applications
Inconel Alloys are resistance to extreme temperatures and its ability to retain enough strength at high temperatures, it is the ideal basket material for heat treat applications.
- Jet Engines
- Marine applications
- Aerospace industries
- Sea-water applications etc.
Inconel Ultrasonic Velocity
Inconel Ultrasonic Testing
| Material | in/sec | m/sec |
|---|---|---|
| INCONEL | 224400 | 5699.76 |
FAQ: Inconel is Ferrous Or Nonferrous metal
Best Answer : Inconel is Non ferrous because it consists mostly of Nickel with only a small amount of Iron in its chemistry.
| ITEM | BRAND | SIZE |
|---|---|---|
| Inconel alloy | Inconel 600 Inconel 601 Inconel 625 Inconel 718 |
Plate:3.0~60.0mm (THK) *1000mm (WIDTH) *2000mm (LENGTH) Bar:Round:Φ5.5~250mm;Square:40~240mm*40~240mm Wire:Φ0.1mm~18mm Strip:0.1~3.0mm(THK)*≤ 420mm (WIDTH) Seamless pipe:6mm~219mm(OD)*0.5mm~18mm(WT) Welded tube:1mm~120mm(OD)*0.1mm~10mm(WT) U Shape pipe: 10mm~40mm (OD)*0.5-5mm (WT) Flange: 3/8” ~48” (DN10 ~DN1200) Tee: 1/2”~48”* SCH 5-SCH160/XXS(WT) |
| Monel alloy | Monel 400 Monel K500 |
|
| Nickel 52 | ||
| Nickel alloy | Nickel 200 | |
| Nickel 201 | ||
| Hastelloy C276 | ||
| Hastelloy alloy | Hastelloy C22 | |
| Hastelloy B2 | ||
| Hastelloy X | ||
| Invar alloy | Invar 36 | |
| Kovar alloy | Kovar 29 | |
| Incoloy 800 | ||
| Incoloy 800H | ||
| Incoloy alloy | Incoloy 800HT | |
| Incoloy 825 |
Inconel Price in India
Inconel Price in India: US $10-12 per Pound
Click here for complete (products, grade & size wise))
Inconel alloys possess excellent resistance to oxidation and have the ability to maintain its structural integrity in high temperature atmospheres. There are certain Inconel alloys that are used in some applications where there is need of material properties that do not easily succumb to caustic corrosion, or corrosion caused by high purity water, and stress-corrosion cracking. While each variation of ASTM B163 Inconel alloy has unique traits that make it effective in different circumstances, the majority of the alloys are used frequently in the chemical industry.
Heat Treatment applications of Inconel is famously resistant to extreme temperatures, and retains enough tensile strength at high temperature to continue holding moderate loads. This makes Inconel the ideal material for heat treat applications comparing favorably to stainless steels grades.
When it is compared to other stainless steel alloys, a basket made from Inconel won’t lose shape as easily when holding parts through a rigorous heat treat application. Some manufacturing processes result into fast Temperature Changes which may combine high and low temperature processes in rapid succession. Most Inconel alloys retain excellent oxidation resistance at high and low temperatures, allowing a single basket made from Inconel to be used in processes where temperatures vary between near-cryogenic lows and heat treatment highs.